It is used to switch the laser intensity between laser start- up and printing. As a rule, do not operate the machine with any of its parts removed. If any, replace the fixing assembly. Otherwise, check the connection of the line. For this reason, there may be information in this manual that does not apply to your locality. To prevent the loss of data dur- ing service work, be sure to print out the contents of the memory before starting the work.
Also, are the spacers free of wear? Remedy: Use selective polling that does not use a password. Remedy : 1 Provide echo remedy 3. Shading correction is executed to correct any discrepancy caused by these factors, and it may take the form of black shading correction or white shading correction. Otherwise, the machine will not be able to detect home position normally, causing the reader motor to go out of sync. Provides a description of the nature of an error indication. F14-203-02 6 Check to see that the firmware in question has been added to the list of firmware. Press the Stop key to end test mode.
The text may differ from product to product or from model to model. Is the fault cor- rected? If the fault cannot be corrected, replace the faulty part. As a rule, do not operate the machine with any of its parts removed. If soiled, clean it with a solution of mild detergent or alcohol; if scratched, re- place them. As a rule, do not operate the machine with any of its parts removed. The manual has 614 pages and is available in English.
For hundreds of other manuals visit our homepage on RepairLoader. Remedy: Provide echo remedy 2. If the correction is not possible, replace the faulty part. Advise the user to use recommended paper. If condensation has developed, dry wipe the part, or leave the machine alone and powered for 60 min.
Developing assembly 3 Try replacing the developing assembly. Remedy: Confidential transmission is not possible. Take care not to damage the ele- ments and the like. Cause: The Stop key was pressed during a communication. Is the fault cor- rected? If the dirt is excessive, use alcohol. Is the fault cor- rected? In standby, the sub thermistor reading is 50ºC or lower.
All service persons are expected to go through the contents of this Service Manual and Service Information bulletins and have a good understanding of the machine, readying themselves to promptly respond to the needs of the field i. We are slowly increasing availability of service manuals on this website and if you can not find what you are looking for, please contact us and we will be happy to provide you if we can get hold of it. F11-703-08 14 Mount the rear cover; thereafter, go to step 16. If it is more than indicated, turn the volume clockwise. Tape the covers and cassette in place.
The copy is solid black. Fixing assembly 4 Execute fixing roller cleaning in user mode. As a rule, do not operate the machine with any of its parts removed. Remedy: Check the number of the other party, and start a call once again. Cause: The other party is not a facsimile machine. If there is a fault in the print images. When an image is read, the image data is subjected to conversion using a γ conversion table.
. It reads an image line by line. Press the Stop key to end the test. Remedy : 1 Provide echo remedy 3. Is the problem cor- rected? As a rule, do not operate the machine with any of its parts removed.